FDA approved rotation-molded high-density polyethylene. Reinforced full-length steel-on- ADA Compliance (when properly installed) 4.4.1 Max. Protruding Objects 4.2.5 Forward Reach 4.2.6 Parallel Approach 4.27.4 Operation The illustrations and descriptions herein are applicable to production as of the date of this technical data sheet. The manufacturer reserves the right to make changes and improvements in designs and dimensions without notice. KB108-01/12 Revised 08/2004 © 2004 by Koala Kare Products, A Division of Bobrick Printed in USA Page 2 of 3 steel hinge mechanism. Molded in graphics and safety messages in five languages. OPERATION: Concealed pneumatic cylinder and hinge structure provides controlled, slow opening and closing of bed. High-density polyethylene is easy to clean and resists odors and bacterial growth. Complies with ASTM static load performance requirements when properly installed. Rated to support a static load of 300 pounds (136 kilos); tested to 400 pounds (182 kilos). Warning: To insure that the unit supports the intended loads, baby changing stations must be properly installed according to the manufacturer¿s instructions. Wall Space: 33.85" (859 mm) wide x 20.5" (521 mm) high Depth (closed): 4" (102 mm) Extension (open): 20" (508 mm) Steel-on-steel hinges for strength and durability.